Removing Basic Unit And Pulling Out The Double Plug; Disassembling Old High Pressure Sensor - Dräger P-Serie Montageanweisung

Disassembly
Removing basic unit and pulling out the double
plug
Remove basic unit in accordance with the instructions for
use.
Remove double plug from the basic unit.
Disassemble the double plug so that the plugs (yellow
and blue) are easily accessible.

Disassembling old high pressure sensor

Plug connection:
Disconnect the L plug connection/ blue hose distributor
of the constant dosage instrument.
Use a screwdriver (head width 2.3 mm) to loosen M3 x 6
set screws by approx. one turn.
20