Operating Instructions; Cleaning, Storage And Maintenance - Scheppach PWS-115 Original Bedienungsanleitung

11. Operating instructions

When working with the device, always wear suitable clothing and
appropriate protective equipment. Prior to each use it must be
ensured that the device is working correctly. Personal protective
equipment and a fully functional device reduce the risk of injuries
and accidents.
11.1 Rough grinding
m WARNING
Use the safety device for grinding
For the best rough grinding results, hold the grinding wheel at an angle
of between 30° and 40° to the workpiece surface and guide back and
forth over the workpiece in steady movements.
11.2 Cutting
m WARNING
Use the safety device for abrasive cutting
When you use the right-angle grinder for cutting purposes, avoid tilt-
ing it in the cutting plane. The cutting wheel must have a clean cutting
edge. A diamond cutting wheel is best used to cut hard stone.
m It is prohibited to use the machine on asbestos materials!
m Never use a cutting wheel for rough grinding.

12. Cleaning, storage and maintenance

m WARNING
Always pull out the battery pack before starting any cleaning
work.
GB | 57
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58