Assembly - Scheppach PWS-115 Original Bedienungsanleitung

9. Assembly

m WARNING
Always remove the battery pack before making adjustments to the
equipment.
Be sure to read the following information before you put your battery-op-
erated tool into operation:
9.1 Fitting the additional handle (Fig. 3)
• The angle grinder must not be used without the additional handle (6).
• The additional handle can be secured in any of the three positions (A,
B, C):
Tool side
Left (Pos. A)
Right (position B / as shown)
Top (position C)
9.2 Adjusting the guard (Fig. 4)
• Adjust the guard (1) to protect your hands so that the material being
ground is directed away from your body.
• The position of the guard (1) can be adjusted to any specific working
conditions. Undo the clamp handle (c) and turn the cover into the re-
quired position.
• Ensure that the guard (1) correctly covers the gear wheel casing.
• Secure the clamp handle (c) again.
• Ensure that the guard (1) is secure.
m Take care that the safety device is secure.
m Never use the angle grinder without the guard.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Suitable for
Right-handed users
Left-handed users
Using cutting wheels
GB | 53