Scheppach PWS-115 Original Bedienungsanleitung Seite 49

8. Do not touch the workpiece immediately after operation; it may be
extremely hot and could burn your skin.
9. Observe the instructions of the manufacturer for correct mounting
and use of wheels. Handle and store wheels with care.
10. Do not use separate reducing bushings or adaptors to adapt large
hole abrasive wheels.
11. Use only flanges specified for this tool.
12. For tools intended to be fitted with threaded hole wheel, ensure that
the thread in the wheel is long enough to accept the spindle length.
13. Check that the workpiece is properly supported.
14. Pay attention that the wheel continues to rotate after the tool is
switched off.
15. If working place is extremely hot and humid, or badly polluted by con-
ductive dust, use a shortcircuit breaker (30 mA) to assure operator
safety.
16. Do not use the tool on any materials containing asbestos.
17. When use cut-off wheel, always work with the dust collecting wheel
guard required by domestic regulation.
18. Cutting wheels must not be subjected to any lateral pressure.
m WARNING
This electric tool generates an electromagnetic field during operation.
This field can impair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or deadly injuries, we
recommend that persons with medical implants consult with their physi-
cian and the manufacturer of the medical implant prior to operating the
electric tool.
Information on the rechargeable battery
Please observe the operating manual for the rechargeable batteries.
Information on the charging unit and charging process
Please observe the operating manual for the charging unit.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB | 49