Troubleshooting; Possible Cause - Scheppach PWS-115 Original Bedienungsanleitung

14. Troubleshooting

The table below contains a list of fault symptoms and explains what you
can do to remedy the problem if your equipment fails to work properly.
If the problem still persists after working through the list, please contact
your nearest service workshop.
Fault
Device does not
start
Motor stops
during operation
Reduced power
60 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

Possible cause

Battery empty
On/off switch defective
Motor defective
Battery defective
Battery empty
Battery not inserted
correctly
Battery defective
Battery depleted
Battery not fully charged Charge battery
Remedy
Charge battery
Repair by an authorised
service centre
Repair by an authorised
service centre
Check the battery, have
it repaired by a certified
electrician if necessary
Charge battery
Re-insert battery
Clean contacts, replace
original battery
Replace battery