Scheppach PWS-115 Original Bedienungsanleitung Seite 43

h) Keep handles and grasping surfaces dry, clean and free from
oil and grease. Slippery handles and grasping surfaces do not allow
for safe handling and control of the power tool in unexpected situa-
tions.
5) Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Safety warnings common for grinding, sanding, wire brushing, or
abrasive cutting-off operations:
b) This power tool is intended to function as a grinder or cut-off
tool. Read all safety warnings, instructions, illustrations and
data provided with this power tool. If you do not observe the fol-
lowing instructions, an electric shock, fire and/or serious injuries may
occur.
c) Operations such as sanding, wire brushing polishing or hole
cutting are not recommended to be performed with this power
tool. Operations for which the power tool was not designed may
create a hazard and cause personal injury.
d) Do not use insertion tools which are not specifically designed
and recommended by the tool manufacturer. Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
e) The permitted speed of the insertion tool must be at least equal
to the maximum speed indicated on the power tool. An insertion
tool which rotates faster than permitted may shatter and fly off.
f) The outside diameter and the thickness of the insertion tool
must correspond to the dimensions of the power tool. Incor-
rectly measured insertion tools cannot be adequately shielded or
controlled.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB | 43