Scheppach PWS-115 Original Bedienungsanleitung Seite 45

l) Position the cord clear of the rotating insertion tool. If you lose
control, the cord may be cut or snagged and your hand or arm may
be pulled into the rotating insertion tool.
m) Never lay the power tool down until the insertion tool has come
to a complete stop. The rotating insertion tool may grab the surface
and pull the power tool out of your control.
n) Do not run the power tool while carrying it at your side. Acci-
dental contact with the rotating insertion tool could snag your cloth-
ing, pulling the insertion tool into your body.
o) Regularly clean the power tool's air vents. The motor's fan will
draw the dust inside the housing and excessive accumulation of
powdered metal may cause electrical hazards.
p) Do not operate the power tool near flammable materials. Sparks
could ignite these materials.
q) Do not use insertion tools that require liquid coolants. Using
water or other liquid coolants may result in electric shock.
Kickback and related safety warnings
Kickback is a sudden reaction to a pinched or snagged rotating insertion
tool, such as a grinding wheel, grinding pad, brush wire, etc. Pinching or
snagging causes the rotating insertion tool to stop abruptly which in turn
causes the uncontrolled power tool to be forced in the direction opposite
of the insertion tool's rotation at the point of the binding.
For example, if a grinding wheel is snagged or pinched by the workpiece,
the edge of the grinding wheel which is entering into the workpiece may
become caught causing the grinding wheel to break off or kick back.
The grinding wheel then either jumps toward or away from the opera-
tor, depending on the direction of the wheels' movement at the point of
pinching. Grinding wheels may also break under these conditions.
Kickback is the result of power tool misuse and/or incorrect operating
procedures or conditions. It can be avoided by taking proper precautions
as given below.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB | 45