Displays And Controls; Battery Terminals And Cables - Waeco PerfectCharge W2000 Bedienungsanleitung

W2000.book Seite 37 Montag, 5. November 2007 6:00 18
PerfectCharge W2000
5.2

Displays and controls

The battery charger has the following display and control elements:
No. in
fig. 7,
page 5
1
2
3
4
5
6
5.3

Battery terminals and cables

The cables can be wrapped around the handles for storage.
The battery terminals (fig. 8 1, page 5) can be stored on the sides
or the front of the device.
All manuals and user guides at all-guides.com
Element
Red LED
"Reverse polarity"
Blue indicator
"Charge status"
Display
Switch
"Jump start/charge"
Switch
"A/V"
Switch
"12 V/24 V"
Technical description
Explanation
This LED lights up if the battery
terminals are reversed.
The charging display consists of three
LEDs that show the charging status of
the battery. The LEDs light up as the
battery charges. Once all three LEDs are
lit and no longer flash, the battery is fully
charged.
This indicator shows either the charge
voltage or the charge current.
Switches the battery charger to "Jump
start" or "Charge" mode. In the middle
position, the charger is switched off.
Switches the display between the
charging current (A) and voltage (V).
Switches the charger output voltage to
12 V or 24 V.
37