Waeco PerfectCharge W2000 Bedienungsanleitung Seite 39

W2000.book Seite 39 Montag, 5. November 2007 6:00 18
PerfectCharge W2000
Note
I
Please observe that all volatile memories of the comfort electronics
will lose their stored data when the battery is disconnected.
You will have to re-enter the following data after reconnecting the
fully charged battery:
– Radio code
– Vehicle clock
– On-board computer etc.
You can find instructions for making these settings in the
corresponding operating manual.
Prepare the battery as follows if it is a non-maintenance-free
battery:
➤ Clean the surface of the battery using a damp cloth to prevent
dirt from getting into the battery.
➤ Unscrew the sealing caps from every battery cell where
possible.
Warning – danger of acid burns
d
Avoid coming into contact with the battery fluid.
➤ Check the level of the battery fluid.
If the fluid is below the minimum level in one or more cells, fill
distilled water up to the filling mark.
Never use normal tap water.
➤ Leave the cells open during the charging process, so that any
gases can escape.
All manuals and user guides at all-guides.com
Using the battery charger
39