Technical Description; Function; Displays And Controls - Waeco PerfectCharge IU12 Bedienungsanleitung

IU6, IU8, IU12
5

Technical description

5.1

Function

The battery charger is designed for 12V vehicle batteries.
A control function checks the voltage of the battery before charging
begins. If the battery is already charged, the charger will not begin
charging. This prevents the battery from becoming overcharged.
The device will not charge deep-discharged batteries.
The charger has safety features that prevent the following:
Short circuit
Overheating
Overloading
Inverse polarity
The battery charger has an IU characteristic.
5.2

Displays and controls

The charger features the following displays and controls:
No. in
fig. 7,
page 5
1
2
3
Element
Red "Error" LED
Blue "Charging
status" charging
display
"0/I" switch
Technical description
Explanation
This LED lights up if the battery termi-
nals are reversed.
The charging display consists of three
LEDs that show the charging status of
the battery. The LEDs light up as the bat-
tery charges. When all three LEDs light
up, the battery is fully charged.
Switches the charger on ("I) and off ("0").
33