Technical Description; Function - Waeco PerfectCharge W2000 Bedienungsanleitung

W2000.book Seite 36 Montag, 5. November 2007 6:00 18

Technical description

5 Technical description
5.1

Function

The battery charger is designed for 12 V and 24 V vehicle batteries.
The battery charger can also be used for jump-starting these
batteries. The flat battery does not need to be fully charged but just
enough to help start the vehicle. The battery is then fully charged
by the vehicle's alternator.
The battery charger has safety features that prevent the following:
Short circuit
Overheating
Overloading
Inverse polarity
The battery charger has a Wa characteristic (see page 50).
The battery terminals can be stored on the sides or the front of the
housing.
The battery charger can be used in both the horizontal and the
upright position.
36
All manuals and user guides at all-guides.com
PerfectCharge W2000