Cochlear Baha 5 Power Benutzerhandbuch Seite 12

• Cochlear Baha wireless devices include an RF
transmitter that operates in the range of
2.4 GHz–2.48 GHz.
• For wireless functionality, only use Cochlear
Wireless accessories. For further guidance
regarding e.g. pairing, please refer to the
user guide of the relevant Cochlear Wireless
accessory.
• No modification of this equipment is allowed.
• Portable RF communications equipment
(including peripherals such as antenna cables
and external antennas) should be used no
closer than 30 cm (12 in.) to any part of your
Baha 5 Power, including cables specified by the
manufacturer. Otherwise, degradation of the
performance of this equipment could result.
• Use of accessories, transducers and cables other
than those specified or provided by Cochlear
could result in increased electromagnetic
emissions or decreased electromagnetic
immunity of this equipment and result in
improper operation.
Sound processor type designations for
models included in this User Manual are:
FCC ID: QZ3BAHA5POWER IC: 8039C-BAHA5POWER,
IC model: Baha® 5 Power.
Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:
This device has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This device generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If the device does cause harmful
12
interference to radio or television reception, which can
be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and
receiver.
• Connect the device into an outlet on a circuit different
from the one in which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
• Changes or modifications can void the user´s authority
to operate the device.
Intended use
The Cochlear Baha System uses bone conduction to
transmit sounds to the cochlea (inner ear) with the
purpose of enhancing hearing. The Baha 5 Power Sound
Processor is intended to be used as part of the Cochlear
Baha System to pick up surrounding sound and transfer
it to the skull bone via a Baha Implant, Baha Softband or
Baha SoundArc and can be used unilaterally or bilaterally.
Indications
The Baha System is indicated for patients with conductive
hearing loss, mixed hearing loss and single-sided
sensorineural deafness (SSD). The Baha 5 Power Sound
Processor is indicated for patients with up to 55 dB SNHL.
Clinical benefit
Most recipients of a bone conduction hearing solution will
experience improved hearing performance and quality of
life compared to unaided listening.
The fitting is to be done either at a hospital, by an
audiologist, or in some countries, by a hearing care
professional.
List of countries:
Not all products are available in all markets. Product
availability is subject to regulatory approval in the
respective markets.
The products are in compliance with the following
regulatory requirements:
• In EU: the device conforms to the Essential
Requirements according to Annex I of Council Directive
93/42/EEC for medical devices (MDD) and essential
requirements and other relevant provisions of Directive
2014/53/EU (RED).