Radio Operation: Basic Functions; Select The Band; Searching For A Station - Medion p 62010 Bedienungsanleitung

82339 DVD-Autoradio DE Content.book Seite 26 Mittwoch, 29. April 2009 8:41 08

Radio operation: basic functions

In radio operation, the basic display will look similar to the following:

Select the band

Press the BAND button to switch between FM (FM1, FM2, FM3), and AM
(AM1 and AM2). You can store six stations in each band.
The three bands FM1, FM2 and FM3 and the two band AM1 and AM2
each cover the same frequency width. This allows you to store up to 18
FM stations and up to 12 AM stations.

Searching for a station

Automatic search
Briefly press the
station.
To stop the search, press
Manual search
Press and hold or
display shows MANU.
Increase or decrease the value by briefly pressing
Stereo and Mono
FM stations are broadcast in stereo. If you have bad reception, it can
sometimes be improved by switching to MONO with the ST button.
EN-26
or scan buttons. The set will search for the next
or again.
scan buttons to start a manual station search. The
or .