Inserting The Car Radio; Control Panel - Medion p 62010 Bedienungsanleitung

82339 DVD-Autoradio DE Content.book Seite 18 Mittwoch, 29. April 2009 8:41 08

Inserting the car radio

Push the car radio carefully into the slot until
it engages.
While pushing the radio in, be careful of how
you fit the cables; they should not be kinked,
crushed or stretched.

Control panel

Inserting the control panel
First, place the right side of the control
unit into the frame.
Then carefully press the left side until it
engages.
Make sure the control panel is positioned
properly and securely. If the control panel
is not fitted properly, error messages
appear in the display and/or several
buttons will not function properly.
Removing the control panel
Press the button. The control panel will be
released and you can take it off.
Anti-theft protection
If the control unit has not been inserted in the frame,
the anti-theft LED on the unit will flash.
Contacts
Removing the control panel will expose the contacts at the
control panel and the radio.
Make sure the exposed contacts are not contaminated. The car radio
might not function properly afterwards.
For protection, always keep the control unit in its case.
EN-18