Connections At The Rear - Medion p 62010 Bedienungsanleitung

82339 DVD-Autoradio DE Content.book Seite 15 Mittwoch, 29. April 2009 8:41 08

Connections at the rear

Overview of the connections at the rear:
Prepare the cable connections
Do not remove the flags from the cables. These are required for the
correct connection.
Pull out the connections in your car ISO slot far enough for you to join
them to the ones from the car radio.
Connect the cables
Please use the car radio ISO block for installation. Never disconnect the ISO
block - If your car ISO plugs do not fit the car radio ISO sockets, you can buy
suitable adapters in specialist garages, from dealers and the specialist
departments of large stores.
Secure, proper electrical connections are provided by both car ISO
plugs (for the loudspeakers and the power connections). In case you
still wish to lay the cables yourself, we explain in detail the uses of the
cables at the end of this chapter.
1. Connect the connector of the ISO socket block to the socket for the ISO
socket block at the rear of the car radio.
2. Connect the both vehicle ISO plugs (one ISO plug for ISO Block A and
one for ISO-Block B) to the car radio ISO block.
EN
EN-15