Iso Installation Slot And Connections; Fit The Installation Frame - Medion p 62010 Bedienungsanleitung

82339 DVD-Autoradio DE Content.book Seite 13 Mittwoch, 29. April 2009 8:41 08

ISO installation slot and connections

The car radio is designed to be fitted
in a standard ISO installation slot. The
dimensions of this slot are 182 mm x
53 mm.
The ISO installation slot is normally equipped with two ISO plugs and an
antenna plug.
If your vehicle has no ISO installation slot, or is not equipped with the
connections, you may use the supplied cable sockets. Please consult a
specialist garage, dealer, or the specialist department of a large store.

Fit the installation frame

Before installation, always use a Phillips
head screwdriver to remove the two
transport safety screws in the top part of
the radio casing (marked with yellow
flags)!
The car radio is delivered with the installation
frame fitted over it. First remove the
mounting frame from the car radio casing.
To do so, push down the two clips at the
sides of the car radio (1) and push the
mounting frame off the radio from the rear
(2).
EN
EN-13