Disposal And Recycling; Intended Use; Residual Risks - Scheppach BG200W Original Bedienungsanleitung

Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consuma-
bles.
Wear parts*: grinding medium, carbon brushes, sharp-
ening wheel, angle gauge, v-belt
* Not necessarily included in the scope of delivery!
m Intended use
The machine complies with the relevant EC Ma-
chine Guideline.
• The manufacturer's stipulations concerning safe-
ty, work and maintenance as well as the measure-
ments specified in Technical data, must be com-
plied with.
• The relevant accident prevention stipulations and
other widely recognised safety rules must be ob-
served.
• The machine may only be used, maintained or re-
paired by expert personnel who are familiar with it
and its dangers. Unauthorised changes to the ma-
chine negate the manufacturer's liability for dam-
ages resulting from this.
• The machine may only be used with the manufac-
turer's original accessories and original tools.
• Every use beyond that is deemed as not intended.
The manufacturer is not liable for damage result-
ing from this; the risk lies exclusively with the user.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
m Residual risks
The machine has been built according to the latest
technology and recognised safety rules. However,
there is still a chance of residual risks whilst work-
ing.
• Risk of injury to fingers and hands from the rotating
grinding wheel during incorrect handling or placing
of the work piece to be ground.
• Risk of injury from ejected work pieces during incor-
rect clamping or handling.
• Electrical hazards when unsuitable electric connec-
tions are used.
• Furthermore, despite all measures taken, residual
risks can occur that are not obvious.
• Residual risks can be minimised by complying with
the safety notices and the intended use as well
as the operating instructions overall.
m Transport
m Unplug the machine!
Carry the equipment by the left and right grinding
wheel cover.
When reassembling the equipment proceed as de-
scribed under section "Assembly", if necessary.
30 english

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must not
be disposed of together with domestic waste in
compliance with the Directive (2012/19/EU)
pertaining to waste electrical and electronic
equipment (WEEE). This product must be disposed
of at a designated collection point. This can occur, for
example, by handing it in at an authorised collecting
point for the recycling of waste electrical and elec-
tronic equipment.
Improper handling of waste equipment may have
negative consequences for the environment and hu-
man health due to potentially hazardous substances
that are often contained in electrical and electronic
equipment. By properly disposing of this product, you
are also contributing to the effective use of natural
resources. You can obtain information on collection
points for waste equipment from your municipal ad-
ministration, public waste disposal authority, an au-
thorised body for the disposal of waste electrical and
electronic equipment or your waste disposal compa-
ny.