Timer; Child Lock - hanseatic 7NF30T0-E111E Gebrauchsanleitung

Page EN-28 Additional functions
(7)
3. To enter a start hour from 0 to 23, use the
+/– sensors or the slider (7).
4. Tap the sensor (10).
The minute indicator will flash on the dis-
play.
5. To enter a start minute from 0 to 59, use
the +/– sensors or the slider (7).
6. To save the set cooking time, tap the
sensor again.
7. Select the function, temperature, cooking
time, etc. and tap the
The oven will switch on at the calculated
time and will switch into standby mode at
the end of the cooking time. You will hear
five signal tones and the display will show
End.
The cooking time can be changed at
any time. The change will take eff ect
approx. 6 seconds after the last sensor
operation.
To end the cooking process early, switch the g
oven off with the sensor (13).

Timer

Your oven is also equipped with a timer. You
set a specific period, just as you would with
an egg timer. Once the period has expired, a
tone sounds. You can set a duration of one
minute up to 23:59 hours.
Please note that the countdown timer does
not switch the oven on or off. You can also
use the countdown timer when the oven is
not switched on.
(1)
(2)
1. Tap quickly on the
2. To enter a start hour from 0 to 23, use the
3. Tap the
4. To enter a start minute from 0 to 59, use
5. To save the time and start the countdown,
sensor (2).

Child lock

Your oven is equipped with a child lock which
protects against the oven being used without
permission or unintentionally switched on or
off or the settings being changed.
The child lock can be
• switched on by tapping on the
• switched off by tapping on the
(1)
(11)
sensor (11).
The symbol will appear on the display
and the hour value will flash.
+/– sensors or the slider (7).
sensor (11).
The minute indicator will flash on the dis-
play.
the +/– sensors or the slider (7).
tap the sensor(11) again.
The display will show the residual time.
Once the pre-set cooking time has elapsed,
you will hear 10 signal tones and the dis-
play will once again show the time
(1)
(11)
sor (11) for 3 seconds.
The symbol will appear on the display.
All of the sensors will be locked.
once again for 3 seconds.
The symbol will disappear from the dis-
play.
(7)
sen-
sensor