Herunterladen Inhalt Inhalt Diese Seite drucken

Countdown Timer/Egg Timer; Change Audible Signal - hanseatic 10143.3eETsPrDpHaJXSp Gebrauchsanleitung

Einbau-backofen mit zeitschaltuhr und pyrolyse
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

controller to the desired position.
The oven will automatically switch on at
the calculated switch-on time.
When the switch-off time has been
reached, the oven will switch off again. In
addition, a signal will sound and the dis-
play will flash 'auto'.
8. Press any button to turn off the signal and
return to normal operation. The display
now once again shows the current time.
WARNING
The oven is now switched on again
and must be switched off manually.
9. Reset the temperature controller and the
function selector to '0'.
Cancelling timer and deleting
automatic settings
1. Press the two arrow keys '<' and '>' simul-
taneously.
The 'auto' symbol goes out. The timer
mode is switched off and the automatic
settings are deleted.
2. Reset the temperature controller and the
function selector to '0'.

Countdown timer/egg timer

You are in the middle of cooking a meal in
the oven and would like to be reminded after
a while to turn the food/top up the fluids, etc.
Please note that the countdown timer does
not switch the cooker on or off.
1. Press the 'OK' button once.
The bell symbol
flashes.
The timer
2. Set the desired duration using the arrow
buttons '<' or '>'.
Shortly after the last keystroke, the time
will reappear and the timer will start to
count down. The bell symbol
played.
After the set time has elapsed, a beep
sounds and the bell symbol
Press any button to turn off the signal.
Countdown stop
3. Press the 'OK' button once.
The bell symbol
flashes and the re-
maining time is shown.
4. Press the two arrow keys '<' and '>' simul-
taneously.
The bell symbol
disappears and the
countdown is stopped.

Change audible signal

You can choose between 3 different audible
signals.
1. Press the two buttons '<' and '>' simulta-
neously.
The dot beneath the symbol ' ' flashes.
2. Press the 'OK' button once.
The display shows 'ton1'.
3. Change the audible signal with the '<' ar-
row button.
The current sound is played and the num-
ber is shown on the display.
4. Press the 'OK' button.
A beep sounds and the entry is saved.
Page EN-23
is dis-
flashes.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis