Signal Tones; Standby/Off; Setting The Time - hanseatic 7NF30T0-E111E Gebrauchsanleitung

Page EN-16 General operating instructions
(14)
The air outlet is through the extraction
hood (14) between the control panel and the
oven door.
The fan will cool the steam emanating from
the oven and grill and will prevent adjacent
furniture from becoming too hot.
After the cooking time has finished, the fan
will continue to run for some time to cool the
appliance down. The length of time depends
on the heat level inside the appliance. Once
the internal temperature has dropped below
75 °C, the fan will stop.

Signal tones

When a sensor is touched, an acoustic signal
can be heard. This tells you that the oven has
understood your action.

Standby/Off

As soon as a power supply has been con-
nected, the oven will be in stand-by mode.
The oven is waiting for your input.
In order to switch the oven off, you must pull
the mains plug out of the socket or switch off
the applicable electric circuits.

Setting the time

You must set the time when using the oven
for the first time or after a longer power cut.
Otherwise, time-controlled operation is not
possible. The display (1) shows 00: 0 0.
The time is displayed in 24-hour format.
1. Tap the sensor (5).
In the display, both the zeros will flash for
the hour display.
2. Tap the +/– sensors or swipe over the
slider (7) to set the number of hours.
3. To switch to the minute display, tap the
sensor.
4. Tap the +/– sensors or swipe over the
slider to set the number of minutes.
5. To save the time, tap the
(1)
(5)
sensor.