Additional Functions; Quick Pre-Heating; Setting The Cooking Time; Setting The End Of The Cooking Time - hanseatic 7NF30T0-E111E Gebrauchsanleitung

Additional functions

Quick pre-heating

The oven offers an additional function in or-
der to speed up the pre-heating process (ex-
ceptions: Functions ,
(1)
• Select a function and a temperature, as
described above, and tap the
sor (9).
The pre-heating symbol will also appear in
the display. The oven will begin to heat.
When the pre-set temperature has been
reached, you will hear one

Setting the cooking time

You can select a cooking time of up to
9 hours.
The cooking time can be set in the range of
– up to 30 minutes in 1 minute steps.
– from 30 minutes in 5 minute steps.
(7)
1. Select a function and a temperature, as
described above.
2. Tap the sensor (5).
On the left, next to the temperature, the
display will flash '00: 0 0 hr'.
3. Select the desired cooking time with the
+/– sensors or the slider (7).
After a short time, the cooking time will light
up permanently.
, and ).
(9)
sen-
one signal tone tone.
(1)
(5) (2)
Additional functions
4. Start the oven's operation with the
sor (2).
Once the pre-set cooking time has elapsed,
you will hear five signal tones and the dis-
play will show End. The oven will switch
into standby mode.
The cooking time can be changed at
any time. The change will take eff ect
approx. 6 seconds after the last sensor
operation.
To end the cooking process early, switch the g
oven off with the sensor(13).
Setting the end of the cooking
time
If you want your cooked food to be ready at
a certain time, you must set the end of the
cooking time and the cooking duration.
Requirements:
– The time is set correctly.
– You have set the cooking time (see the pre-
vious section, steps 1 to 3.).
(1)
(13)
1. First, tap the sensor (13) to exit other
functions.
2. Tap the sensor (10).
The symbol will appear on the display
and the hour indicator will flash.
Page EN-27
sen-
(10)