Maintenance; Storage; Disposal And Recycling - Scheppach PL75 Original Bedienungsanleitung

11. Maintenance

If specialist personnel must be brought in for
extraordinary ser vice or repairs during the war-
ranty period and thereafter, please contact a ser-
vice provider recommended by us or con tact the
manufacturer directly.
• Overhauls, maintenance work, cleaning, as well as
the eli mi nation of any malfunctions must only be
undertaken af ter turning off the motor.
• All protective and safety equipment must be rein-
stalled immediately upon completion of any repair
or maintenance work.
Regular maintenance
The regular maintenance decribed above and in the
para graph below can be carried out by unskilled per-
sonnel.
• Do not oil the plunge cut saw, cause cutting must
be carried out in dry conditions; all rotating parts
are self-lubricating.
• During maintenance, wear protective gear if pos-
sible (accident-prevention goggles and gloves).
• Remove cuttings when necessary both from the
cutting area, work surfaces and support bases.
Use of an aspirator or brush is recommended.
ATTENTION: Do not use compressed air jets!
Regularly check blade conditions: if difficulties
should arise during cutting, have it sharpened by
skilled per sonnel or replace it if necessary.
Assistence
When in need of skilled personnel for special main-
tenance, or for repairs, both during and following the
guarantee pe riod, always apply to authorized centres
for assistance or directly to the manufacturer if there
is no authorized centre in your area.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables. Wear parts*: Carbon brush, saw blade
* Not necessarily included in the scope of delivery!

12. Storage

Store the device and its accessories in a dark, dry and
frostproof place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

13. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.
The equipment and its accessories are made of vari-
ous types of material, such as metal and plastic. De-
fective components must be disposed of as special
waste. Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment. Improper handling of waste
equipment may have negative consequences for the
environment and human health due to potentially
hazardous substances that are often contained in
electrical and electronic equipment. By properly dis-
posing of this product, you are also contributing to the
effective use of natural resources. You can obtain in-
formation on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal of
waste electrical and electronic equipment or your
waste disposal company.