Fronius Symo 3.0-3-S Serviceanleitung Seite 94

Inserting the Internal Fan:
94
(2) (1) (2)
(2) (1) (2)
WARNING!
Follow the safety rules (see the begin-
ning of the "Safety" section)
Take the inverter out of the wall bra-
1
cket and open it (see "Opening and
Closing the Device")
Disconnect and pull out the fan cable
2
(1) from the SymoPS
Use a slotted screwdriver to undo the
3
expanding rivets (2)
Remove the internal fan
4
NOTE!
Ensure the air is flowing into the
device!
Insert the internal fan
1
Use a slotted screwdriver to press in
2
the expanding rivets (2)
Thread in the fan cable (1) and con-
3
nect to SymoPS
Close the inverter and place it in the
4
wall bracket (see "Opening and Clo-
sing the Device")
After switching on the inverter, carry out a
fan test via the display (see Operating
Instructions)