Additional Safety Instructions; Residual Risks - Parkside PMS 160 A1 Originalbetriebsanleitung

ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.

Additional safety instructions

WARNING! The device is not
suitable for grinding materi-
als containing lead and as-
bestos.
Warning! Sanding can result
in the formation of hazard-
ous dusts (e.g. metals or
some wood types) which
can present a hazard to the
operator or persons in the
vicinity. Make sure that the
workplace is well ventilated.
Always wear safety goggles,
safety gloves and respiratory
protection.
• Secure the workpiece. A work-
piece that is retained with clamping
appliances or a vice is held more se-
curely than with your hand.
• Only use the power tool for dry
sanding. Avoid using on damp
materials. Penetration of water into
the power tool increases the risk of
electric shock.
• Avoid overheating the sanded
object and the sander itself. Pos-
sible fi re hazard.
• The workpiece gets hot dur-
ing grinding. Do not touch the
machined area, allow it to cool
down. There is a risk of burning. Do
not use coolants or the like.
• Always empty the dust con-
tainer before work breaks.
Sanding dust in the dust sack, micro
GB
fi lter, paper sack (or in the fi lter sack or
extraction system fi lter) can self-ignite
under unfavourable conditions such
as fl ying sparks caused by grinding
metals. Particular hazards are caused
if the sanding dust is mixed with paint,
polyurethane residues or other chemi-
cal substances, or if the sanded object
is hot after long working periods.
Please check the operating manual of
your vacuum cleaner whether it is suit-
able for the suction of grinding chips.
• Connect the appliance to a power
socket with a residual current circuit
breaker of rated residual current (RCD)
no more than 30 mA.
• If the supply cord of this power
tool is damaged, it must be re-
placed by a specially prepared
cord available through the ser-
vice organization.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear
protection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
IE NI CY
9