Introduction; Intended Use; Features; Package Contents - Parkside PDSSAP 20-Li A1 Originalbetriebsanleitung

CORDLESS IMPACT DRIVER
PDSSAP 20-LI A1

Introduction

Congratulations on the purchase of your new tool.
You have chosen a high-quality product. The oper-
ating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass all associated documents on to any future
owner(s).

Intended use

This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has clockwise/anti-
clockwise rotation, a 1/4" hexagon socket bit
holder and an LED working light. The light on this
appliance is intended to illuminate the immediate
work area of the appliance. The rotary impact
function of the appliance enables the power of the
motor to be converted into uniform rotary impacts.
The impact mechanism comes into effect during
tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer
accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance.
Use this appliance only as described and for the
application areas specified. The appliance is not
intended for commercial use. Any other usage or
modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
44
GB │ MT
│
■

Features

Tool holder
Locking collar
1a
Rotation direction switch/lock
Belt clip
LED work light
Torque display
Torque preselection
ON/OFF switch/speed control
Battery pack*
Release button for the battery pack
High-speed charger*
Battery display LED
Battery charge level button
Red charge control LED
Green charge control LED

Package contents

1 cordless impact driver
1 belt clip
1 carrying case
1 set of operating instructions
Technical specifications
Cordless Impact Driver PDSSAP 20-Li A1
Rated voltage
Gears
Rated idle speed
Impact frequency
Torque levels
Max. screw capacity
Tool holder
20 V (DC)
3-speed gearbox
1st gear n 0–1900 rpm
0
2nd gear n 0–2800 rpm
0
3rd gear n 0–3600 rpm
0
1st gear 0–2200/min
2nd gear 0–3400/min
3rd gear 0–4300/min
1st level 120 Nm
2nd level 180 Nm
3rd level 226 Nm
M16
1/4" hexagon socket
PDSSAP 20-Li A1