Storage And Transport; Maintenance - Scheppach NTS30 Premium Originalbetriebsanleitung

Empty the stainless steel container (8)
after each use: After opening the screw
cap (7) to drain out the liquids, the liquid
collected can be drained out. Residual
liquid remains in the stainless steel con-
tainer (8).
To remove residual liquid, take off the ma-
chine head (2) by releasing the locking
hooks (4) from the stainless steel contain-
er (8). Pour out the liquid residue. Clean
the container with a damp cloth.
• Replace paper filter bag when full
• Always keep the device clean. Do not
use cleaning agents or solvents.
• Keep the ventilation slots clean and free
of dirt and dust.
• Clean the device only with a soft brush
or a damp cloth.
• Clean the foam filter (b) with a little soap
and running water and then leave it to
air dry.

11. Storage and Transport

Store the device and its accessories in a
dark, dry and frost-proof place that is in-
accessible to children. The optimum stor-
age temperature is between 5 and 30˚C.
Store the electrical tool in its original
packaging.
Cover the electrical tool in order to pro-
tect it from dust and moisture.
Store the operating manual with the elec-
trical tool.
• Wind the mains cable (3) around the
top cable holder (12). (Fig. P)
• There are four recesses on the top side
of the caster mounting base (6) for stor-
ing the floor nozzle (e), the joint nozzle
(f) and the metal extension tube (g).
(Fig. Q)
26 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
• The remaining accessories can be
stored in the stainless steel container
(8).

12. Maintenance

Warning!
Disconnect the mains plug before carry-
ing out any maintenance work.
Connections and repairs
Connections and repairs of electrical
equipment may only be carried out by an
electrician.
Please provide the following informa-
tion in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Motor data - type plate
Service information
Please note that the following parts of
this product are subject to normal or nat-
ural wear and that the following parts are
therefore also required for use as con-
sumables. Wear parts*: Foam filter, Paper
filter bag, Folded filter for dry vacuuming
* Not necessarily included in the scope of
delivery!