Introduction; Device Description - Scheppach NTS30 Premium Originalbetriebsanleitung

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschi-
nen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much
enjoyment and success.
Note:
According to the applicable product liabil-
ity laws, the manufacturer of the device
does not assume liability for damages to
the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating in-
structions,
• Repairs by third parties, not by author-
ized service technicians,
• Installation
non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system
that occurs due to the non-compliance
of the electric regulations and VDE reg-
ulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the op-
erating instructions before installing and
commissioning the device. The operating
instructions are intended to help the user to
become familiar with the machine and take
advantage of its application possibilities in
accordance with the recommendations.
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
and replacement
The operating instructions contain im-
portant information on how to operate
the machine safely, professionally and
economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to
increase reliability and service life of the
machine.
In addition to the safety regulations in
the operating instructions, you have to
meet the applicable regulations that apply
for the operation of the machine in your
country. Keep the operating instructions
package with the machine at all times and
store it in a plastic cover to protect it from
dirt and moisture. Read the instruction
manual each time before operating the
machine and carefully follow its informa-
tion. The machine can only be operated
by persons who were instructed concern-
ing the operation of the machine and
who are informed about the associated
dangers. The minimum age requirement
must be complied with.
In addition to the safety instructions con-
of tained in this operating manual and the
specific regulations of your country, the
technical rules generally accepted for the
operation of machines of the same type
must be observed.
We accept no liability for damage or acci-
dents which arise due to non-observance
of these instructions and the safety in-
formation.

2. Device description

1. Handle
2. Machine head
3. Connection cable
4. Locking hooks
5. Castors 5a.Castor mounts