Blitz Der Master-Einheit Aus; Einstellung Der Kommunikationskanäle; Ettl: Vollautomatisches Drahtloses Blitzen - CULLMANN CUlight FR 60C Bedienungsanleitung

2. Blitz der Master-Einheit AUS

2. Master Unit's Flash OFF
When the master unit is set to OFF, only the slave units will fire a
Wenn der Master-Blitz auf AUS (OFF) gestellt ist, werden nur die
2. Master Unit's Flash OFF
Slave-Blitze blitzen.
flash.
When the master unit is set to OFF, only the slave units will fire a
flash.
2. Master Unit's Flash OFF
When the master unit is set to OFF, only the slave units will fire a
flash.
• Auch wenn der Blitz des Master-Blitzes deaktiviert ist,
Even if the master unit flash firing is disabled, it still fires a
löst er trotzdem einen Vorblitz aus, um Drahtlossignale
preflash to transmit wireless signals.
Even if the master unit flash firing is disabled, it still fires a
zu übermitteln.
preflash to transmit wireless signals.
3. Setting the Communication Channel
Even if the master unit flash firing is disabled, it still fires a
3. Einstellung der Kommunikationskanäle
If there are other wireless flash systems nearby, you can change the
3. Setting the Communication Channel
preflash to transmit wireless signals.
channel IDs to prevent signal interference. The channel IDs of the
Falls sich andere drahtlose Blitzgeräte in der Nähe befinden,
If there are other wireless flash systems nearby, you can change the
können Sie den Kanal wechseln, um Signal-Interferenzen zu
master unit and the slave unit(s) must be set to the same.
channel IDs to prevent signal interference. The channel IDs of the
vermeiden. Es muss der gleiche Kanal am Master-Blitz und dem/
3. Setting the Communication Channel
master unit and the slave unit(s) must be set to the same.
den Slave-Blitz/en eingestellt werden.
If there are other wireless flash systems nearby, you can change the
channel IDs to prevent signal interference. The channel IDs of the
master unit and the slave unit(s) must be set to the same.
4. ETTL：Fully Automatic Wireless Flash Shooting
Using Automatic Wireless Flash with a Single Slave Unit
4. ETTL：Fully Automatic Wireless Flash Shooting
4. ETTL: Vollautomatisches
Using Automatic Wireless Flash with a Single Slave Unit
drahtloses Blitzen
4. ETTL：Fully Automatic Wireless Flash Shooting
Verwendung des automatischen, drahtlos gesteuerten
Using Automatic Wireless Flash with a Single Slave Unit
Blitzes mit einem einzigen Slave-Blitz.
28
- 65 -
1
1
Press Function Button 4 so
Drücken Sie die Funktions-
taste 4, sodass <
1
that <
MENU2
Press Function Button 4 so
im LC-Display angezeigt
on the LCD panel.
that <
wird.
MENU2
on the LCD panel.
1
Press Function Button 4 so
that <
MENU2
2
2
Drücken Sie die Funktions-
on the LCD panel.
Press Function Button 1
ON/OFF
taste 1 <
2
<
ON/OFF
ON/OFF am Master-Blitz
Press Function Button 1
ON/OFF of the master unit.
einzustellen.
<
ON/OFF
< > Der Master-Blitz geht in
< >：The master unit flash
ON/OFF of the master unit.
2
ON (Ein).
firing is ON.
Press Function Button 1
< < > Der Master-Blitz geht in >：The master unit flash
< >：The master unit flash <
OFF (Aus).
ON/OFF
firing is ON.
ON/OFF of the master unit.
firing is OFF.
< >：The master unit flash
< >：The master unit flash
firing is OFF.
firing is ON.
< >：The master unit flash
firing is OFF.
1
Press Function Button 4 so
1
that <
1
MENU3
Drücken Sie die Funktions-
Press Function Button 4 so
on the LCD panel.
taste 4. sodass <
that <
MENU3
im LC-Display angezeigt
on the LCD panel.
1
wird.
Press Function Button 4 so
that <
MENU3
2
on the LCD panel.
Press Function Button 1 so
2
that <
2
CH
Drücken Sie die Funktions-
Press Function Button 1 so
on the LCD panel. Turn the
taste 1, sodass <
that <
CH
LC-Display angezeigt wird. Select Dial to choose a
on the LCD panel. Turn the
2
Wählen Sie am Einstellrad
channel ID from 1 to 4.
Press Function Button 1 so
Select Dial to choose a
den Kanal zwischen 1 und
3
Press the <SET> button to that <
CH
4 aus. channel ID from 1 to 4.
3
confirm. on the LCD panel. Turn the
3
Drücken Sie die < SET >
Press the <SET> button to
Select Dial to choose a
Taste um zu bestätigen.
confirm.
channel ID from 1 to 4.
3
Press the <SET> button to
confirm.
1
Master Unit Setting
1
● Attach a TT685C camera
Master Unit Setting
flash on the camera and
● Attach a TT685C camera
set it as the master unit.
flash on the camera and
1
1
●
As a master unit, TT685C Master Unit Setting
Einstellen des Master-Bit-
set it as the master unit.
zes
can control Canon
● Attach a TT685C camera
●
As a master unit, TT685C
• Setzen Sie das CUlight
speedlites e.g. 580EXII,
flash on the camera and
FR 60C Blitzgerät auf die
can control Canon
600EX-RT via wireless.
set it as the master unit.
Kamera und definieren Sie
speedlites e.g. 580EXII,
es als Master-Blitz.
●
As a master unit, TT685C
600EX-RT via wireless.
• Als Master-Bitz kann der
can control Canon
CUlight FR 60C Canon
speedlites e.g. 580EXII,
Speedlites, wie die Mo-
600EX-RT via wireless.
delle 580EXII, 600EX-RT
usw., drahtlos steuern
MENU 2
> is displayed
> is displayed
> is displayed
>, um
> to control the
> to control the
> to control the
> is displayed
MENU 3
> is displayed
> is displayed
> is displayed
CH
> im
> is displayed
> is displayed
>
>