Transport And Handling; Handling Instructions - MAXA LWF 13 Benutzer- Und Installationsanleitung

6. TRANSPORT AND HANDLING

■ Packaging and components
DANGER!
!
CAUTION! DO NOT OPEN OR TAMPER WITH THE PACKAGING BEFORE INSTALLATION.
The units should only be moved and lifted by specialised personnel trained in these operations.
Check on arrival that the unit has not been damaged during transport and that it is complete with all its parts.
To remove the packaging ,follow these instructions:
1. Check for visible damage
2. Open the packaging.
3. Check that the packet containing the manual for use and installation is inside.
4. Dispose of the packaging material in accordance with current legislation, at the appropriate waste reception or recycling site.
PRESERVE THE ENVIRONMENT!
!
Dispose of the packaging materials in compliance with the national or local legislation in force in your country.
CAUTION!
DANGER!
Do not leave the packaging within reach of children.
■

Handling instructions

DANGER!
Movement of the unit should be performant with care, in order to avoid damage to the external structure and to the
internal mechanical and electrical components.
!
Also make sure that there are no obstacles or people along the route, to avoid the danger of collisions or crushing and
to prevent the lifting or handling device from turning over.
CAUTION!
All the operations listed below must be carried out in accordance with current health and safety regulations, both as
regards the equipment used and as regards the procedure followed. Before commencing moving operations, check
that the lifting apparatus has the required capacity for the unit in question.
The units may be moved or lifted either by hand or by means of a suitable trolley. Do not transport the unit alone if its weight is more than
35kg.
■ Storage conditions
Always check on the package for the direction of the storage and the number that can be stacked.
fig. 6-1
50