Statement Of Compliance - MAXA LWF 13 Benutzer- Und Installationsanleitung

6. CONNECTIONS
• The implement is fitted with screw terminal strips for the connection of leads having a maximum crosssection of 1.5 mm² (as regards
power contacts, terminals are aimed for one lead each).
• Jobs involving electrical connections must be performed with the appliance off.
Nota: For wiring, please refer to the wiring diagrams in the user's and installer's of the fan coil unit.
• Make sure that the available power voltage conforms to the one that the machine requires. Use no screws but those attached.
•
Do not mount the instrument on metal surfaces.
Note: Do not use the terminals 1 and 2, you shouldn't connect any to these therminals.

7. STATEMENT OF COMPLIANCE

The product complies with the EC directives and other regulations here below:
- 73/23/EEC and subsequent amendments
- 89/336/EEC and subsequent amendments
- Low voltage: EN 60730-2-9
39
10 9 8 7 6 5
.
M
L
N
4 2 1
fig. 2