2
Safety
2.1
General safety instructions
WARNING
Live parts!
Heed the following points when working on electrical
cables and connections:
The national safety regulations apply for all elec-
trical work on the system.
The system must be supplied through a residual
current protection device (RCD) with residual cur-
rent of not more than 30mA.
NOTICE
Disconnect system from energy sources!
Ensure that the electrical components are discon-
nected from the electrical power supply during
the work.
Operating and maintenance instructions must be
kept available at the product.
2.2
Personnel - qualification
The relevant operational safety regulations and the haz-
ardous substances ordinance or national equivalents apply
for the operation of the system.
28 / 148
The operator of the system must:
prepare a risk assessment
identify and demarcate corresponding hazard zones
carry out safety training
secure the system against unauthorised use.
016-003