Kessel Staufix FKA Einbau- Und Betriebsanleitung Seite 46

3.11 Reset
3.13 Activation of potential-free
contact
0 Data exchange*
* The menu for USB data exchange is displayed on pressing the ESC button in the System Info area or after successful
detection of the USB flash drive.
5.5 Control unit software
Updating and reading out the data
For the control unit with plugged in USB flash drive to be
switched on, the USB flash drive including its connector must
not be longer than 20 mm. Otherwise the housing cannot be
closed. External hard drives must not be connected, the con-
trol unit would not work (max. 100 mA power supply). Before
use, the USB flash drive must be given a name via a Win-
dows PC.
When a USB flash drive is connected to the control unit,
it will be recognised automatically. An acoustic signal is
heard during connection and disconnection. Then the data
exchange menu will appear with these selection options:
46 / 148
3.10.5 Nederlands
3.10.6 Polski
0.1 Data read-out
0.2 Software update
0.3 Read out parameter
Software update
Read in parameter
Read out the data
If menu 0 system information is displayed, (if a USB flash
drive is connected) the ESC button can be used to select the
previously described data exchange menu.
Reading out data
Connect USB flash drive.
Select data read-out and confirm with OK.
A file with the system settings and the logbook is saved
on the USB flash drive (*.csv).
016-003