Herunterladen Inhalt Inhalt Diese Seite drucken

easydriver infinity 3.5 Montageanweisung Und Bedienungsanleitung Seite 36

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7. Commissioning/operation
B6
Swivelling off the drive rollers
Secure the vehicle against rolling off
before swivelling off the drive rollers!
Press the two arrow buttons on
the remote control and hold them
down until the drive rollers have
been fully retracted.
The display flashes until the swivelling-off process
has been completed. The motor drive automatically
switches off when the end position has been reached.
The symbol is permanently lit up once the swivel-
ling-off process has been completed.
B7
Switching OFF the easydriver
Switch off your easydriver by pressing
the I/O button on your remote control
unit once.
The drive units may not remain engaged on the tyres,
as this might damage the tyres. Driving with a towing
vehicle while the drive units are connected is prohi-
bited, as it might damage the caravan or trailer as well
as the towing vehicle.
B8
Switching OFF the system
Switch the remote switch OFF.
The easydriver must be switched off after
every operation by using these switches.
Pull the handbrake and/or secure your caravan or
trainer with trestles against unintended rolling-off.
GB14
8. Notes/warnings
8.
Notes/Warnings
The easydriver uses bidirectional communication
between the remote control and the base station. This
makes it possible to transfer information from the
base station to the remote control.
Operating status display LED, white:
• 1x flashing per second: searching for the
base station
• Permanently lit up: Connected to the
base station, system ready for operation.
Remote control battery LED, red:
• Symbol not lit up: Battery voltage is in
order
• 1x per second flashing: Batteries should
be exchanged
• Permanently lit up: Batteries empty. All
driving functions are terminated.
Overload indicator LED, red
• Symbol not lit up: Current flow through
the base station is in order
• Symbol permanently lit up and acoustic
warning: Overcurrent detection. All dri-
ving functions are switched off. Reacti-
vate the system by switching the remote
control Off and On.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis