easydriver infinity 3.5 Montageanweisung Und Bedienungsanleitung Seite 30

6. Installation, electrical system ž
Should the easydriver app not work cor-
rectly, close it immediately. This is the only
way to stop it communicating with the base
station. If this happens, please e-mail Reich (info@
reich-easydriver.com), stating your smartphone/ta-
blet model, the operating system version (iOS/And-
roid) and the internal software.
The app controller has been designed solely to cont-
rol compatible easydriver models.
The first time you use easydriver with the easydriver
app, choose an open area with plenty of space to get
a feel for how the smartphone/tablet works with the
app functions.
Before each use, check that the smartphone/tablet
and the app controller are communicating with each
other properly by performing a quick test run with the
easydriver swivelled out (driving rollers not on the
tyres).
For the app controller to work properly and the
connection to stay reliable, the smartphone/tablet
should not be further than 5 metres away from the
caravan/trailer being manoeuvred.
Never let children play with the easydriver
app.
Check the iOS App Store or the Google Play
Store regularly for updates for the easydri-
ver app.
Make sure that your smartphone/tablet has
appropriate virus protection
Should the Bluetooth device (e.g. smartphone) on
which you are using the app go into standby mode
and therefore lose the Bluetooth connection, switch
the base station off and on again once to establish
a new connection with the easydriver app controller.
The Bluetooth connection will be restored automati-
cally after the restart.
GB8
App-Controller
‡
Bluetooth module installation:
The app controller is supplied with a 4 metre cable.
When installing the module, make sure that as few
components as possible are located between the
smartphone/tablet and the Bluetooth module.
The module may only be mounted inside the caravan.
Install the module inside the caravan as high up as
possible, e.g. in a wardrobe or on the ceiling.
Mount the module using the sticky pad on the back.
The module can also be mounted by inserting suita-
ble screws through the bore holes provided (screws
not supplied).
Now route the cable to the master base station.
Remove the housing cover from the base station (if
you have a twin version, from the master base sta-
tion).
Now attach the connector to the base station as
shown in the figure.
App installation/registration:
Download the easydriver app from the iOS Apple Sto-
re or the Google Play Store.
iOS
(version 11.3 or later)
https://itunes.apple.com/de/app/easydriver/id1423125015?mt=8
https://play.google.com/store/apps/details?id=com.reich.easydriver
Android
(version 6.0 or later)