easydriver infinity 3.5 Montageanweisung Und Bedienungsanleitung Seite 29

6. Installation, electrical system ž
Now route the battery cables from the base stations
to the battery (see the connection diagram ‡). The
battery should NEVER be further away from the base
station than the length of the cables supplied. The
shorter the cables, the better (take note of the mi-
nimum distance between the battery and the base
station).
If the fuse (150 A) has tripped, replace it with one of
the same type.
Never reverse the positive (+) and negative
(-) connections of the power supply!
E6 Connecting when using the MPP
The remote switch is not required when using the
REICH MPP (Mobility Power Pack) battery. The MPP
has its own power switch.
If you are not using the remote switch for the Infinity,
you must connect jumper J1 on the base stations.
Calibrating the incline detection function:
The caravan/trailer must be in a level position during
calibration!
As soon as the caravan/trailer is level, pro-
ceed as follows to calibrate the easydriver
incline detection function.
‡
Calibrate step by step using the following button
combinations:
1. Caravan/trailer in a level posi-
tion (this is very important)
2. Remote control switched on
(ON/OFF)
3. Press (simultaneously) buttons
a+b+c+d
4. Press button a
5. Press button d
6. Press button c
7. Press button b
The calibration process is com-
plete when you hear the signal
(5 beeps)!
E7 App controller (Bluetooth module)
With the app controller, using your easydriver is a
piece of cake. All you now need to control/opera-
te your caravan/trailer is the app on a compatible
smartphone/tablet – although you can continue to
use the normal remote control too.
The easydriver app for iOS devices has been designed
for the iPhone 5S and above, running iOS software
version 11.3 or later. The app will only display in por-
trait mode and can be downloaded from the iOS App
Store.
For Android systems, the easydriver app is available
for Android version 6.0 or later. This app too will only
display in portrait mode and it can be downloaded
from the Google Play Store.
Note: The easydriver app has been tested on a wide
variety of smartphones and tablets running the very
latest software releases (iOS/Android). Reich GmbH
will continue to take reasonable steps to test the app
on various smartphone/tablet models with different
software versions. However, Reich GmbH cannot gu-
arantee that future software updates to the operating
system (iOS/Android) and by the smartphone/tablet
manufacturer will not affect the function of the app.
GB7