General Information; Safety Instructions - easydriver infinity 3.5 Montageanweisung Und Bedienungsanleitung

2. General information

It is essential to read these instructions carefully be-
fore installation and operation and to store them in
the vehicle ready for use!
The installer is responsible for proper and appropriate
installation. It is preferable to have a suitable speci-
alist company perform the installation work (see
the dealer directory at www.reich-easydriver.com/
en/service/dealer-directory). It can be performed in
front of or behind the axle. Parts of the chassis, axle
suspensions or breaking facility may under no cir-
cumstances be removed, changed or affected. Appro-
priate operation can only be ensured after correct
installation, with correct tyre pressure and the correct
distance between drive rollers and tyres.
Reich GmbH does not accept liability for damage of
any kind resulting from the installation or operation
of the easydriver with a caravan or trailer.
We will exclusively and at most refund the full
purchasing costs for the easydriver in the event of da-
mage caused by a fault in the device.
We reserve the right to change the easydriver at any
time without prior announcement.
The easydriver is a manoeuvring aid for caravans and
other trailers to be used at camp sites and on private
land.
The easydriver can be maneuvered either with the app
or with the handset, but not at the same time. For use
of the handset the easydriver app has to be closed.
Sales in the USA and Canada as well as operation in
these countries are prohibited.
Reich GmbH reserves all rights. This installation and
operating instructions and their content may not be
reproduced by printing, photocopying, on microfilm
or in any other electronic or mechanical way without
the prior written approval of Reich GmbH.
GB2

3. Safety instructions

Safety instructions
• Check whether the drive rollers are in contact with
the tyres before manoeuvring (see Figure 3.2 =
ON). The manoeuvring process may only be per-
formed in this position.
• Practice handling the remote control and its func-
tions in open terrain when using the easydriver for
the first time.
• The installation of an easydriver usually reduces
the ground clearance. Please consider the reduced
ground clearance when driving and manoeuvring
(80 mm minimum ground clearance - 120 mm re-
commended).
• Check whether the drive rollers are in the rear po-
sition before driving off (see Figure 3.1 = OFF.
• Secure the vehicle before swivelling off
the drive rollers!
• The caravan/trailer may only be moved by the
towing vehicle when the manoeuvring drive has
been swivelled off (Figure 3.1 = OFF).
• You may not operate the easydriver if it is faulty!
Have the device inspected by an authorised, spe-
cialised workshop.
• The battery must be disconnected and protec-
ted against reconnection before any installation,
maintenance or assembly work takes place. Wor-
king with live voltage poses a mortal danger.
• Batteries must be handled, stored and disposed
of according to the manufacturer's instructions.
Used-up batteries must be recycled. Risk of acid
burns: Battery acid is very corrosive. Keep children
away from acid and batteries. Check the battery for
firm attachment. Adhere to the instructions on the
battery and regularly check it. Exchanging or char-
ging must be performed with great care.
• Never exceed the specifications given in
the technical data (see last page of the
operating manual), such as those relating
to the climbing ability and overall weight
of the caravan/trailer.