Klarstein Robuchon Handbuch Seite 55

Adaptation during preparation
It is possible to adjust the heating mode and temperature setting during operation by
turning the function control or the adjustment control. If no other button is pressed within
6 seconds of the adjustment, this setting is saved. If you want to adjust the preparation
time, press the TIME button and adjust the preparation time with the right-hand
adjuster. If no other button is pressed within 6 seconds after the adjustment, this setting
will be saved. If you have already set an end time, no changes can be made during
preparation. If you want to cancel the preparation, press the ON/OFF button.
Note: If you change mode/temperature/preparation time during preparation, this
may have a negative effect on the food to be prepared. It is therefore recommended
that you only do this if you are already familiar with the procedure.
Timer
• By pressing the TIMER button, the timer function can be used. When the time you set
has elapsed, the unit will beep.
• After pressing the TIMER button the first time, set the hour, press the button again
and set the minute. Finally, confirm your setting by pressing the TIMER button again.
You can set the timer before and during preparation. If you select a function and the
temperature, the timer function is not available.
Parental lock
The device is equipped with a parental lock, which prevents accidental activation or
modification of the settings already made. If you press the TIMER button for 3 seconds,
the parental lock is activated. If you press the TIMER button again for 3 seconds, the
parental lock is deactivated. The parental lock can be activated both in the operating
mode and when the machine is switched off. Once the child lock is activated, a lock
symbol is displayed on the screen.
EN
55