Klarstein Robuchon Handbuch Seite 45

Installation
• To ensure safe operation of this unit, make sure that it has been installed properly
and in accordance with the operating instructions. Damage caused by incorrect
installation is not covered under the warranty.
• Wear protective gloves during installation to prevent cuts from sharp edges.
• Check the unit for damage before installation and do not connect the unit if it is
damaged.
• Remove all packing material and adhesive film from the unit before turning on the
power.
• The dimensions are given in mm.
• Before installation, make sure it is the correct model. The model number can be
displayed on the control panel.
EN
45