Camera Ip Configurations By Lan; Auto Mode - Avtech avh304 Bedienungsanleitung

2.2 Camera IP Configurations by LAN

2.2.1 AUTO Mode

Auto mode is to simplify the complicated network settings within three minutes. The connection mode of the LAN
port is "AUTO" by default. This mode is suitable when the LAN port of the device is connected to a hub.
Note: SETTING Path:
Type 1
Connect IP cameras as many as your recorder supports:
Rear
Panel
eSATA port
Disk Array
Note: For access this recorder remotely with your mobile device or laptop, you need to connect this
recorder to Internet. For details, please get the setup manual from the supplied CD or from
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
Downloaded from www.Manualslib.com
ADVANCED CONFIG)  NETWORK  LAN  MODE.
(
RJ45
network cable
High Definition
Display Interface
Internet
Monitor
which supports HD image display
manuals search engine
Alarm I/O to connect to ala rm devices
Alarm I/O
Or
Please refer to the IP camera旧
user manual for connection
Power Switch
DC48V IN
IP camera
Laptop
iPhone
iPad
Android Devices
DC48V Adapter
6
CONNECTION
Remote
Controller
Please install a HDD into this
recorder before connecting it to
IP cameras for video recording.