Avtech avh304 Bedienungsanleitung Seite 38

PUSH STATUS
Before using this function, make sure:
 You have iPhone
 You have subscribed the mobile network service from your mobile service provider.
 The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to "APPENDIX 4 MOBILE SURVEILLANCE
VIA EAGLEEYES" at page 38.
 You have configured EagleEyes to access this recorder, and Push Video is enabled. For details, please refer to "APPENDIX 5 SET
PUSH VIDEO" at page 39.
You'll get a text message telling you the occurrence of selected system event(s).
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
Step1: Switch "ACTION" to "ON".
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable "Push Status" in EagleEyes on your mobile device, and try to trigger an alarm event to see if
MESSAGE MAIL
Note: For E-mail notifications, make sure you have configured an E-mail account in "NETWORK" 
"E-MAIL" to send the notifications.
Enable this function in "ACTION", select the event type(s) you want to send notifications in "EVENT", and add
the E-mail address(es) to which you want to send notifications in "RECEIVER".
You'll get an E-mail telling you the occurrence of your selected event(s).
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
Downloaded from www.Manualslib.com
(for selected models only)
® ®
, iPad , or Android™ mobile phone or tablet.
ADVANCED CONFIG
PUSH VIDEO PUSH STATUS
ACTION
EVENT
you'll get Push Status.
ADVANCED CONFIG
PUSH VIDEO PUSH STATUS
ACTION
EVENT
RECEIVER
manuals search engine
MESSAGE MAIL VIDEO MAIL
ON
 ALL
 VIDEO LOSS
 HDD FULL
 POWER ON
 HDD (CLEAR / NO HDD / OVER TEMPERATURE)
 NET LOGIN
 KEY UNLOCK
 NETWORK
 UPS
 SYSTEM ABNORMAL
MESSAGE MAIL VIDEO MAIL
ON
 ALL
 VIDEO LOSS
 HDD FULL
 POWER ON
 HDD (CLEAR / NO HDD / OVER TEMPERATURE)
 NET LOGIN
 KEY UNLOCK
 NETWORK
 UPS
 SYSTEM ABNORMAL
SETUP
32
MAIN MENU