Connection; Hard Disk Installation - Avtech avh304 Bedienungsanleitung

2. CONNECTION

2.1 Hard Disk Installation

A hard disk is necessary for the recorder to save video footage, and firmware upgrade might be failed if there's no
hard disk installed in this recorder.
Note: Here takes a 16CH model as an example of how to connect a hard disk to your device.
Step1: Remove the top cover, and find the hard disk connector and bracket in the device.
Bracket
Screws
Step2: Get a compatible hard disk. With the PCB side facing down, insert the hard disk to one of the hard disk
connector.
Note: It's not recommended to use a green hard disk with this device to make sure it works properly.
Downloaded from www.Manualslib.com manuals search engine
CR2032
3
CONNECTION
Hard Disk
Connector
Bracket