Quick Operation; Main Menu; Playback Panel - Avtech avh304 Bedienungsanleitung

3.2.3 Quick Operation

Move to the arrow mark to extend the quick menu bar and show the four functions as follows:

3.2.4 Main Menu

Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.
* For selected models only

3.2.5 Playback Panel

/
/
Downloaded from www.Manualslib.com
Click to show the channel switch panel and select the channel you want.
Click to display the playback control panel, and click
list.
Click to open the IP search window and check the current connection status of each channel.
Click to show the power off panel to either halt or reboot the system.
QUICK START Click to set the status display, image settings, and date & time.
SYSTEM Click to set the system configurations.
EVENT INFORMATION Click to enter the event search menu.
Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK, DISPLAY,
ADVANCED CONFIG
RECORD, and NOTIFY*.
SCHEDULE SETTING Click to set record timer and event timer.
Fast Forward Increase the speed for fast forward.
Fast Rewind Increase the speed for fast rewind.
Play / Pause Click to play the latest recorded video clip immediately, and click again to pause.
In the pause mode, click
Stop Click to stop the video playback.
Slow Playback Click once to get 1/4X speed playback, and click twice to get 1/8X speed playback.
Previous / Click to jump to the next / previous time interval in an hour, for example, 11:00 ~ 12:00 or
Next Hour 14:00 ~ 15:00, and start playing the earliest event video clip recorded during this whole hour.
Quick Search Click to enter the quick search menu for specific record data search.
manuals search engine
to play the latest recorded video clip, or click
once to get one frame forward, and click
11
USER INTERFACE
to enter the search
to get one frame rewind.