Frequently-Used Functions; Key Lock / Unlock; Ip Device Search - Avtech avh304 Bedienungsanleitung

4. FREQUENTLY-USED FUNCTIONS

4.1 Key Lock / Unlock

To lock or unlock local operation, click
to
To unlock local operation, you'll be prompted to enter the user name and password to access.
Note: The default user name and password are both "admin", which is the highest user level
Note: Different user level has different access privilege for certain functions. For details, please refer to
"4.3 User Level Creation" at page 13.

4.2 IP Device Search

Note: This function is available only for "SUPERVISOR". To know more details, please refer to "4.3 User
Level Creation" at page 13.
Click
(i.e. 10.1.1.xx by default).
You'll see the list of every connected IP camera with its connection status to this recorder and MAC address.
IP
10.1.1.12
10.1.1.13
10.1.1.14
10.1.1.15
10.1.1.16
10.1.1.17
10.1.1.18

To fix the camera IP address, or allow the recorder to assign an IP address to your IP camera, select "SETUP",
and select "STATIC IP " or "DHCP" for "NETWORK TYPE".
Click "APPLY" and "EXIT" to save your changes.
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
Downloaded from www.Manualslib.com
(lock) or (unlock).
(IP Search) to start searching IP camera(s) connected in the same network segment as the recorder
IP SEARCH
PORT MAC
88 00:0e:53:e5:9a:f1
88 00:0e:53:a6:91:18
88 00:0e:53:a5:9f:a2
88 00:0e:53:e1:4e:k5
88 00:0e:53:s5:3e:h6
88 00:0e:53:e6:4b:26
88 00:0e:53:g2:3b:e7
SETUP
DHCP
10.1.1.14
80
admin
*****
255.0.0.0
10.1.1.10
168.95.1.1
APPLY
manuals search engine
(unlock) or (lock) on the device status bar to change the status
PROTOCOL STATUS
AVTECH CONNECTED TO CH1
AVTECH CONNECTED TO CH2
AVTECH UNUSED
ONVIF CONNECTED TO CH3
ONVIF CONNECTED TO CH4
ONVIF CONNECTED TO CH5
AVTECH CONNECTED TO CH6
CONNECT SETUP
EXIT
12
FREQUENTLY-USED FUNCTIONS
EXIT