Static / Dhcp Mode; Manual Connection Setup - Avtech avh304 Bedienungsanleitung

2.2.2 Static / DHCP Mode

Note: SETTING Path:
When the LAN port of the recorder is connected to a router (not a hub), you can:
 Choose "Static" when you know the network segment of your router.
For example, the IP address of your router of 192.168.0.1, and the network segment of your router will be
192.168.0.xx (xx is ranged from 2 ~ 254).
You can assign the IP address of the connected IP camera(s) by yourself.
 Choose "DHCP" when your router supports the DHCP function, and you do not know the network segment of
your router.
The IP address of the connected IP camera(s) will be assigned by your router.

2.3 Manual Connection Setup

Note: SETTING Path:
To manually assign the address of your camera connected locally, click "URI" to modify.
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
EXIT
Note: To configure this recorder to access other IP camera connected remotely for live viewing or video
backup, you need to connect this recorder to Internet first. For details, please get the setup
manual from the supplied CD or from
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
Downloaded from www.Manualslib.com
ADVANCED CONFIG)  NETWORK  LAN  MODE.
(
ADVANCED CONFIG)  CONNECTION.
(
ADVANCED CONFIG
CHANNEL
CH1
CH2
CH3
CH4
manuals search engine
URI
ONVIF://10.1.1.22:8080
ONVIF://10.1.1.14:88
PANASONIC://10.1.1.30:88
VIVOTEK://10.1.1.12:88
9
CONNECTION
CONFIG
SETUP
SETUP
SETUP
SETUP