Avtech avh304 Bedienungsanleitung Seite 14

Downloaded from www.Manualslib.com
To solve this, use our brand's IP camera, and reconfigure its IP address to 10.1.1.xx (xx ranges from 11 ~
253), in the same network segment as the recorder.
a) Move your mouse to the left to call the quick bar, and select "
camera with its connection status to this recorder and MAC address.
b) Select the IP address which is not used, and select "SETUP".
IP PORT MAC
10.1.1.12 88 00:0e:53:e5:9a:f1
10.1.1.13 88 00:0e:53:a6:91:18
10.1.2.14 88 00:0e:53:a5:9f:a2
10.1.1.15 88 00:0e:53:e1:4e:k5
10.1.1.16 88 00:0e:53:s5:3e:h6
10.1.1.17 88 00:0e:53:e6:4b:26

c) Select "DHCP" in "NETWORK TYPE".
d) Click "APPLY" and "EXIT" to save your changes.
SETUP
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
e) The recorder will then detect the IP camera and display images soon.
manuals search engine
IP SEARCH
STATUS
CONNECTED TO CH1
CONNECTED TO CH2
UNUSED
CONNECTED TO CH3
CONNECTED TO CH4
CONNECTED TO CH5
CONNECT SETUP
DHCP
10.1.1.14
88
admin
*****
255.0.0.0
10.1.1.10
168.95.1.1
APPLY EXIT
8
". You'll see the list of every connected IP
EXIT
CONNECTION