Detection; Alert - Avtech avh304 Bedienungsanleitung

5.4.3 DETECTION

CONNECTION
CAMERA
DETECTION

ALERT

NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
1) ALARM
Select N.C./ N.O depending on your installation need. The default alarm value is OFF.
2) SENSITIVITY
Select the detection sensitivity of the selected channel, the lower the value, the higher the sensitivity.
3) MOTION
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
4) AREA
Click "EDIT" to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.
5) INTERNAL ALARM
This function appears only when the camera connected supports human detection.
Select "ON" to enable human detection, or "OFF" to disable it.
5.4.4 ALERT
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to "OFF", item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).
Downloaded from www.Manualslib.com
ADVANCED CONFIG
CH1 CH2 CH3 CH4
ALARM
SENSITIVITY
MOTION
AREA
INTERNAL ALARM
(For selected camera models only)
ADVANCED CONFIG
EXT. ALERT
INT. BUZZER
KEY BUZZER
VLOSS BUZZER
MOTION BUZZER
ALARM BUZZER
HDD BUZZER
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
HDD OVERHEAT ALERT (°C)
manuals search engine
OFF
0
ON
EDIT
ON
ON
OFF
ON
ON
ON
ON
ON

5

5

60
27
MAIN MENU