Display; Record - Avtech avh304 Bedienungsanleitung

5.4.6 DISPLAY

CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY

RECORD

NOTIFY
EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) QUAD SCREEN DURATION
Select the quad screen dwell duration time in second (03 / 05 / 10 / 15).
3) DISPLAY COVERT
Select "ON" or "OFF" to display or hide the wording "COV." when covert recording is activated in "CAMERA".
4) HDD DISPLAY MODE
Select "REMAINING SIZE" to show the remaining HDD capacity for recording in GB, or "REMAINING TIME"
to show the remaining recording time.
5) BRIGHTNESS / CONTRAST / SATURATION
Click the current value to manually adjust the brightness/contrast/saturation/ of the screen.
5.4.7 RECORD
Note: Please DO NOT change the date or time of your recorder after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it's recommended to clear all hard disk data, and start recording again.
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
1) MANUAL RECORD
Set the manual recording function on / off.
2) EVENT RECORD
Set the event recording function on / off.
3) TIMER RECORD
Set the timer recording function on / off.
Downloaded from www.Manualslib.com
FULL SCREEN DURATION
QUAD SCREEN DURATION
DISPLAY COVERT
HDD DISPLAY MODE
BRIGHTNESS
CONTRAST
SATURATION
CH COVERT IN SUPERVISOR MODE
(For selected models only)
ADVANCED CONFIG
MANUAL RECORD
EVENT RECORD
TIMER RECORD
PRE-ALARM RECORD
OVERWRITE
KEEP DATA LIMIT (DAYS)
RECORD CONFIG
manuals search engine
ADVANCED CONFIG
(For selected models only)
OFF
ON
OFF
ON
ON
OFF
SETUP
30
MAIN MENU

03

03
ON

REMAINGING SIZE
128
128
128
ON