Kessel Aqualift F Basic Einbau- Und Bedienungsanleitung Seite 67

5.4 Fit and install pump
Grease seal.
Mount fittings to pump and fasten in
place with screws.
Hang pump in place.
Connect pump to pressure pipe con-
nection.
Lock the one-handed closure in posi-
tion.
Feed cable through the conduit pipe
and connect electrically.
Ensure that there is adequate cable
length to be able to remove the
pump during maintenance.
016-102_01 Pumping station / Installation and operating manual 67 / 144