Setting The Time/Date; Setting The Language - Moretti Forni F45E Bedienungsanweisung

3.3.2 HOTKEY
The "Hotkey" function ( "star" key) is a key that can be customised for
direct access to a specific function, as chosen by the user.
Enter the "Hotkey" menu to view the current setting represented by the
selected item. To assign a different function to a "Hotkey", move the
highlighting with the "SELECTION" keys to the required item and press
"OK" to confirm.
If necessary, press "RETURN" until you return to the main screen.
Press the "Hotkey" to directly enable the selected function.
3.3.3 SWITCH ON TIMER
This function can be used to order timed start-up of the oven, setting up
to two different start-up and shut-down times for every day of the week
(fig. 27).
Scroll through the list on the display using the "SELECTION" keys to
select the following items.
- "Enable/Disable": enables/disables the on timer
- "Settings": to manage the on/off times programmed
Scroll through the list with the "SELECTION" keys as far as the
"Enable" and press "OK" to confirm and enable the function. If there is
no on/off set time, you will be redirected to the "Settings" screen to add
at least an on/off set time.
Place the cursor with the "SELECTION" buttons on the time screen
relative to the day of the week to be programmed. The days of the week
are set out on 4 pages. The switch on times are graphically represented
by "ON" and the switch off times by "OFF". Times are graphically
represented as HH:MM. //:// show that switch on/off are disabled.
Use the "+" and "-" keys to increase/reduce the selected field. In the HH
field, select the "//" symbol to disable a specific timer. At the end of the
setting process, press "OK" to confirm. Press "RETURN" to go back to
the previous screen without confirming the changes.
When the switch on timer is enabled, the top bar contains the "Timer On"
icon (fig.24a part. I), while when the oven is in STOP mode, the status
bar messages also include the next time time the oven will be switched
on, using the format "ON dd
off, the status bar will read "OFF dd hh:mm".
The settings table needs to be completed with even just one "On" to
activate the function: the oven will switch on at the first "on"
chronologically enabled and which it encounters from the moment it is
enabled
NOTE:
Setting an "On" without setting a subsequent "Off" will
still be considered an active setting: the oven will turn on
automatically at the time set, and will have to be turned off
manually. In the same way, setting "Off" that does not involve a
prior "On" will also be considered an active setting and the oven will
switch off automatically at the set time, if it was manually switched
on beforehand.
At the switch on (or off) time, an intermittent buzzer will sound and the
status icon for the timer will indicate that the oven is about to turn on (or
off). Use the Start/Stop button to switch on (or off).
WARNING!
The sound alarm serves to signal that the
appliance is about to start up and therefore, anyone within its radius
of activity for any reason must move to a safe distance or disconnect
the equipment from the power supply; the above function and
relevant risk must be made known to all those who might be in the
vicinity of the appliance for the purpose of safeguarding them
against accidents or injury.
Once the oven starts up (or shuts down) again at the same time, the
"Timer" function will stay on. Therefore, if no changes are made, one
week later at the same time, the oven will start up (or shut down) again.
NOTE:
If the operator forces an oven start-up when the timer is
switched on before the set time, then the oven will start up normally
and at the start-up time set for the timer, everything will proceed as
usual (the oven is already on and therefore no buzzer will sound).
The same thing happens if the oven is already off at the time set for
shut down.
NOTE:
If there is a power outage while the timer is being used
(Black-out) no parameters will be changed; the important thing is
for the power to return before the start up time.
NOTE:
The control unit is equipped with an internal timer,
after which the display turns off automatically if the oven is on
STOP mode. Press any button to activate the control unit. If the
main switch is on "1" and the display is off - make sure that the
control unit is not in this status before turning off the switch. Press
any key then proceed as described in point 3.7. to activate the
control unit.
hh:mm". While the oven is switching
3.3.4

SETTING THE TIME/DATE

To set the time and date, use the "SELECTION" keys to edit any change.
Use the "+" and "-" keys to increase/reduce the selected field. Press
"OK" to confirm the change. Press "RETURN" to go back to the
previous screen without confirming the changes.
The time format is given as HH: MM. The date format is given as
DD/MM/YY.
3.3.5

SETTING THE LANGUAGE:

To change the language
"SELECTION" keys to find the required item and press "OK" to
confirm. Press "RETURN" to go back to the previous screen without
confirming the changes.
3.3.6 °C/°F SETTING
The oven can be set to use/view temperatures in centigrade (°C) or
Fahrenheit (°F). The current setting is displayed on the main screen to
the right of the temperature with the appropriate symbol.
To change the current settings, scroll through the list with the
"SELECTION" keys to find the required item and press "OK" to
confirm. Press "RETURN" to go back to the previous screen without
confirming the changes.
3.3.7 ASSISTANCE
This menu contains information about the oven which will be needed
when requesting Assistance.
Scroll through the list on the display using the "SELECTION" keys to
select the following items.
- "Info": displays information about Service, software version installed
and current oven configuration.
-"Update software": starts software update
WARNING!
authorised by the Manufacturer. The operation may compromise the
correct operation of the appliance.
"Reset": this starts a partial restore process for the factory settings
(programs stored in the memory will not be deleted)
IMPORTANT!
trained and authorised by the manufacturer as it may affect the
correct operation of the equipment.
- "Factory settings": starts the general default settings process (any
existing Programs are deleted)
WARNING!
authorised by the Manufacturer. The operation may compromise the
correct operation of the appliance.
- "Align": starts the vertical alignment process for the graphic. Use
the "SELECTION" keys to move the corresponding graphic.
- "Alarms": displays any errors. "SELECTION UP" key scrolls
through the list of alarms present. The appliance status, in case there are
pending alarms, is shown on the status bar with the corresponding status
icon (fig.24a pos.M)
- "Logfile": starts diagnostic data saving procedure on external USB
device.
- "Advanced": displays the advanced settings of the configuration
page. See point 3.3.7.1.
- "Format": starts the formatting process.
WARNING!
authorised by the Manufacturer. The operation may compromise the
correct operation of the appliance!
Press "OK" to confirm the selected item. Press "RETURN" to go back
to the previous screen without confirming the changes.
3.3.7.1 "ADVANCED SETTINGS"
Access MENU, select SERVICE, press OK, select ADVANCED
SETTINGS with the "SELECT" button and access the advanced settings:
- "Automatic Door": if enabled, it indicates that the door movement
automatically starts/ends baking. Disable this feature to manually
manage the Start/Stop button to start/end baking. The symbol √ on
the right indicates that the function is active.
- "Manual Steam": indicates the amount of steam which is introduced
into the baking chamber if steam is manually introduced through
the "Steam" button (Fig. 15b pos. 5) or in cases where a different
setting is not specified (Fig. 24a pos. E). Select the required
program with the "SELECT" keys and then press "+" e/o "-" to set
the desired value.
- "Delta lower Temperature":F100E model only is the adjusted
temperature applied to the lower temperature with respect to the
higher Temperature Select the required program with the
"SELECT" keys and then press "+" e/o "-" to set the desired value.
- "Steam unit": it is the unit of measure used for steam injection. It is
expressed in seconds, but other units of measurement may be
UK/9
settings, scroll through the list with the
Procedure reserved to trained personnel
This process is only permitted to persons
Procedure reserved to trained personnel
Procedure reserved to trained personnel