Parkside PLV 1500 B1 Originalbetriebsanleitung Seite 10

GB IE NI
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- Before checking, cleaning or
working on the machine;
- When the power cable is dam-
aged or has become tangled
- After contact with a foreign
object. Examine the machine
for damage and carry out the
necessary repairs before re-
starting and working with the
machine.
If the machine starts to vibrate
abnormally, an immediate
check must be carried out,
- search for signs of damage;
- have any necessary repairs
carried out on damaged
parts;
- examine for loose parts and
tighten these.
• Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any re-
sulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Before switching on the ma-
chine, always check whether
all screws, nuts, bolts and other
fasteners are tightly secured and
that the protection devices and
protective gratings are in place.
Worn or damaged labels must
10
be replaced. Never operate
the implement if safety devices
(e.g. impact protector, parts of
the cutting facility or bolts are
missing, worn out or damaged.
Check especially the power
cable and starting lever for
damage. To avoid imbalance,
all tools and bolts must be ex-
changed as complete sets.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.
• Ensure that all nuts, bolts and
screws are firmly tightened and
that the implement is in a safe
working state.
• Never try to repair the imple-
ment yourself, other than you
have been trained accordingly.
All work that has not been listed
in these Instructions must only be
carried out by authorised servic-
ing agencies.
• Treat the implement with the
greatest care. Always keep the
tool clean for better and safer
work. Follow the maintenance
instructions.
• Never overload the implement.
Always work within the speci-
fied capacity range. Do not use
low-power machines for heavy-
duty work. Do not operate the
implement for purposes for
which it is not intended.
• Check the collection unit regu-
larly for wear or loss of function.
• Replace worn or damaged parts
for safety reasons.
• When using the machine with